What’s the best way to creating the new look of your carpet? Regular vacuuming. We recommend twice a week. This prevents dirt accumulating at the base of the carpet pile, which can nearly always lead to wear and tear.
To protect your carpets, we also advise placing door mats at all entry points to your home or office. This will scrape dirt, grit and moisture from people’s shoes. Try to clean the door mats regularly too, to ensure their efficiency.
Try to restrict rubber soled shoes – such as sports shows and trainers – and all types of heels from walking on your new carpet. It’s also a good idea to move chairs around periodically, as heel abrasion often contributes to wear and tear when people sit down.
After a while, all carpets need a good clean to bring back their original appearance and colour. We suggest you get your carpet cleaned by a specialist cleaning company.
If you clean your carpet yourself, always follow the manufacturer’s instructions. You should always test a small, unobtrusive area before cleaning the entire carpet. If a stain reappears after you’ve already cleaned it, the spill and/or the cleaning agent may not have been removed completely. So that means you’ll need to clean and rinse the carpet again.
If in doubt consult a carpet cleaning specialist. If you need any further advice, call us on 01977 801362 or Contact Us.
Spills and stains
If a spill or stain occurs you must act fast. Gently dab the spill with a paper towel or a clean white cloth. Never rub a stain. This only causes further carpet damage and spreads the stain even more.
If you’ve soaked up the spill, now take an appropriate cleaning product and work from the outside of the stain to the centre. Use small quantities at a time. Work the product into the stain using a small, soft brush, cloth or sponge. Never pour the product directly on the stain.
Always read the label of any cleaning products, as some harsh cleaners will remove the colour from your carpet, which will leave even more damage. It’s a good idea to try the carpet cleaner on an inconspicuous part of your carpet first.
Once your carpet is free from the stain, blot up any excess liquid and let the spot dry. Use a hairdryer if you like. Then if the stain is still visible, repeat the process until you’re happy with the results.
- Soak up liquid with kitchen roll, tissues, toilet roll or a clean cloth
- Scoop up or scrape off any solids
- Try to identify unknown spots prior to treatment. If unsure, use a solvent first
- Always blot the stain, never rub
- Always work from the outside edge of the stain inwards
- Take care with applying solvents to bitumen-backed carpet tiles
- When using solvents always ensure there’s plenty of fresh air ventilation
- Always thoroughly rinse out water-based spotters with clean water
- Dry the spot, if possible, with a hair dryer
Professional carpet cleaning companies will do a spot clean for a small charge. So if the stain proves difficult to remove, just give us a ring and we’ll point you in the right direction.
If you need any further advice, call us on 01977 801362 or Contact Us.